Homeguard Damp & Timber Ltd: home

ServicesHomeguard Damp & Timber Ltd

Schedule of services

We diagnose and treat damp problems, wood-destroying beetles and timber decay. Eight services, each starting with finding the cause. Open any entry for the detail.

01Services

The eight services

  1. S1

    Damp surveys

    Electronic moisture meters and non-invasive testing profile the damp in the property. You receive a detailed written report with the probable causes, our recommendations and, where needed, a quotation.

    Reports can be a deciding factor in a house purchase or sale

    Page coming

  2. S2

    Rising damp

    Not always visible: it is often hidden by decoration. Treated with a cream-based chemical damp-proof course, injected into small holes at low pressure. Salt-contaminated plaster usually needs renewing as well.

    Treatment to BS 6576

    Full details

  3. S3

    Penetrating damp

    Damp can show on inside and outside walls for many reasons. The survey establishes which.

    Cause found first

    Page coming

  4. S4

    Condensation and mould

    A family of four or five puts around 15 litres of water vapour into the air each day. Where that air meets a cold surface it condenses, and mould follows, with a musty smell. We look at ventilation, heating and insulation, and can arrange extraction or whole-house ventilation, fitted by a qualified electrician.

    About 15 litres of vapour a day

    Page coming

  5. S5

    Woodworm

    Common furniture beetle leaves slightly oval exit holes of 1.5–2mm. Treated with a water-based spray at low pressure; it is normally safe to return home the same day. Deathwatch beetle attacks hardwoods, mainly oak.

    Exit holes 1.5–2mm

    Page coming

  6. S6

    Dry rot

    Spreads quickly through brickwork and plaster as well as timber. In an established outbreak, red dust (spores) settles on furnishings and floors. It should be treated as soon as it is diagnosed.

    Treat on diagnosis

    Page coming

  7. S7

    Wet rot

    Timber decay caused by long contact with damp masonry or poor ventilation. Affected timber is renewed or preserved, depending on how far the decay has gone.

    Renew or preserve

    Page coming

  8. S8

    Basement waterproofing

    A multi-coat render system (tanking) or a cavity drain membrane, chosen by what the basement will be used for.

    Tanking or membrane

    Page coming

02How it works

Four stages, in writing

The same order on every job, from the first inspection to the guarantee.

  1. Stage 1

    Inspection

    We inspect for damp, timber infestation and decay, basement waterproofing, condensation and mould.

  2. Stage 2

    Written report

    You receive our findings and recommendations in writing, with a quotation if work is needed.

  3. Stage 3

    The work

    Completed to a high standard, leaving a clean site and a happy client.

  4. Stage 4

    Guarantee

    We issue our own guarantees of up to 15 years, depending on the treatment.

Why survey first

The cost of getting it wrong can be very costly. The survey is how we go about getting it right first time.

Request a survey

Tell us what you are seeing and where. We will get back to you to arrange an inspection.